Printer HP Laser Jet 50.4 Fuser error

[Infinix30]

My printer HP Laser Jet Pro MFP M227 fdw displayed error such as 50.4 Fuser error turn off then turn off what could be the problem 

[Max3Aj]

@Infinix30, Welcome to HP Support Community. 

Thank you for posting your query, I will be glad to help you. 

The 50.4 Fuser Error on your HP LaserJet Pro MFP M227fdw typically indicates a fuser-related issue, often due to a power supply problem or a hardware fault in the fuser unit itself.

Power Cycle the Printer

• Turn off the printer using the power button.
• Unplug the power cord from the wall outlet.
• Wait for at least 30 seconds.
• Plug the printer directly into a wall outlet (avoid using surge protectors or power strips).
• Turn the printer back on and check if the error clears.

Check the Power Source

• Ensure the wall outlet provides stable power.
• The printer should be the only device on that circuit to avoid power fluctuations.

Verify Paper Settings

• Make sure the paper type and fuser mode in the printer settings match the paper you're using. Incorrect settings can cause fuser errors.

If the Error Persists

• The fuser unit may be faulty and might need replacement. In that case, we suggest you please visit the nearest HP authorized service center, the service team will check and assist you. 
  Kindly follow this link to locate the nearest HP service center: HP® Service Center Locator - Africa | HP® Support
  (Select the country from the dropdown menu and enter the city name or pincode) 

50.04.00 | HP® Support

I hope this helps. 

Take care and have a good day. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Select "Yes" on the bottom left to say “Thanks” for helping! 

Max3Aj

HP Support