cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    HP Solution Center Adobe Flash player error

    Please check this document to find the workaround solution for Print and Scan - HP Solution Center doesn't open

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    HP Solution Center Adobe Flash player error

    Please check this document to find the workaround solution for Print and Scan - HP Solution Center doesn't open

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
New member
1 0 0 0
Message 1 of 2
69
Flag Post

Printer failure

HP Recommended
HP office jetpro 6968

Printer failure.  If you continue to get this message contact HP

1 REPLY 1
HP Support Agent
HP Support Agent
16,789 16,770 1,312 1,324
Message 2 of 2
Flag Post
HP Recommended

@Jmbpt02, Welcome to HP Support Community!

 

Follow the steps below-

Step 1: Check for obstructions in the carriage path

Clear obstructions from the carriage area inside the printer.

  1. With the printer on, disconnect the power cord from the rear of the printer.

  2. Open the door to access the carriage inside of the printer.

  3. Look in the carriage path for debris such as crumpled paper or dislodged labels, and then remove any that you find.

    Obstruction inside the printer

  4. Use your hand to move the carriage to each side, making sure it moves freely. If the carriage is stalled or docked to one side of the printer and you cannot move it, continue with these steps.

    Moving the carriage from side to side

  5. Close the carriage access door.

  6. Reconnect the power cord to the rear of the printer, and then turn the printer on.

If the error persists, continue to the next step.

 

Step 2: Reset the printer

Reset the printer to recover from printer failures.

  1. With the printer turned on, disconnect the power cord from the printer.

  2. Unplug the power cord from the power source.

  3. Wait 60 seconds.

  4. Reconnect the power cord to a wall outlet and to the printer.

    NOTE: 

    HP recommends plugging the printer directly into a wall outlet.

If the error persists, continue to the next step.

 

Step 3: Service the printer

Service or replace your HP product if the issue persists after completing all the preceding steps.

Go to Contact HP Customer Support to schedule a product repair or replacement. If you are in Asia Pacific, you will be directed to a local service center in your area.

To confirm your warranty status, go to HP Product Warranty Check. Repair fees might apply for out-of-warranty products.

 

Hope this helps! Keep me posted. 

 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

TEJ1602
I am an HP Employee

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation