Printer not resetting

[Emmy124]

Hi., I have Hp Laserjey m211dw which is stuck on yellow blinking light… I’ve tried all the factory resets and switching on techniques but none is solving my issue… it’s been since 2 days now and none of the techniques are working …I need help asap 

[Garp_senchau]

@Emmy124, Welcome to HP Support Community,

Thank you for posting your query; I’m here to help by guiding you through steps to resolve this issue

I'm sorry to hear about the issue you're experiencing with your HP LaserJet M211dw printer. A persistent yellow blinking light can indicate different issues depending on the printer model, but it typically relates to a problem with the printer's status.

Here are some general troubleshooting steps you can try:

Check Printer Connections:

• Make sure the printer is properly connected to the power source and to the computer or network.
• Ensure that all cables are securely attached.

Paper Jam:

• Check for any paper jams inside the printer. Open the printer’s access doors to ensure there are no blocked or stuck papers.

Ink or Toner:

• Verify that the toner cartridge is correctly installed. Remove the cartridge and reinstall it to make sure it is securely positioned.
• Check if the toner is running low and consider replacing it with a new one if necessary.

Network Connection:

• If the printer is connected to a network, ensure it is connected to the correct network and there are no connectivity issues.

Restart Devices:

• Restart both the printer and the computer or device you are printing from.

Firmware Update:

• Check if there is any firmware update available for your printer model and update if necessary. Firmware updates can sometimes resolve ongoing issues.

Also, you may refer to this guide: HP LaserJet M207-M212 printers - Blinking lights | HP® Support

I hope this helps.

Please feel free to reply here if you have any questions or if you need further clarification on any of the steps. 

Take care and have a good day. 

Did we resolve the issue? If yes, please consider marking this post as "Accepted Solution" and click "Yes" to give us a helpful vote - your feedback keeps us going!

Regards,