Printer not working

[Radhan]

HP laser mfp 130 series 

Power button not lighting.

Status light is orange.

Printer not working 

[Raj_05]

Hi @Radhan,

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

It sounds like your HP Laser MFP 130 series printer might be facing a hardware issue. Here are some steps you can try to troubleshoot the problem.

• Check Power Connection: Ensure the power cord is firmly connected to both the printer and the power outlet. Try plugging it into a different outlet if possible.
• Reset Printer: Unplug the printer from the power source, wait for about 60 seconds, then plug it back in and try turning it on again.
• Inspect for Error Lights: The orange status light could indicate a specific error. Check the printer’s manual or HP’s support website for what the orange light might mean.
• Check for Paper Jams: Open the printer’s paper tray and any access doors to check for any paper jams or obstructions.
• Check Ink or Toner Levels: Ensure that there are no issues with the ink or toner cartridges. Sometimes a low or empty cartridge can cause errors.
• Check Printer Firmware: If the printer powers up, check for any firmware updates on HP’s website.

I hope this helps.

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

Alden4

HP Support