Printer printing far down page

[Sharoni1944]

Printing too far down page, cutting off information on bottom

[A_Gayathri]

Hi @Sharoni1944 ,

Welcome to The HP Support Community.  

Thank you for posting your query, I will be glad to help you.

I understand your HP DeskJet 2752 All-In-One Printer is printing too far down the page, cutting off information at the bottom, here are some troubleshooting steps you can follow to resolve the issue:

1. Check Printer Settings

• Paper Size: Ensure that the paper size selected in your printer settings matches the paper size loaded in the printer.
• Margins: Check the margins in your document settings. Make sure they are not set too small.
• Page Layout: Verify that the page layout settings in the application you are printing from are correct.

2. Update Printer Drivers  Software and Drivers for HP DeskJet 2752 All-in-One Printer 

• Make sure you have the latest drivers installed for your printer. You can download the latest drivers from the HP Support website.

3. Align Print Heads

• Perform a print head alignment. This can usually be done through the printer’s control panel or the HP software installed on your computer.

4. Clean Print Heads

• Clean the print heads to ensure there is no ink buildup causing misalignment.

5. Check Paper Feed

• Ensure the paper is loaded correctly in the tray and that the paper guides are snug against the paper without bending it.

6. Printer Firmware Update Update the firmware on an HP printer

• Check if there is a firmware update available for your printer on the HP Support website and install it if available.

7. Print a Test Page

• Print a test page from the printer’s control panel to see if the issue persists. This can help determine if the problem is with the printer or the software.

8. Application-Specific Settings

• If the issue occurs when printing from a specific application, check the print settings within that application. Ensure that the page size, margins, and scaling are set correctly.

9. Reset Printer

• Try resetting the printer to its default settings. This can often resolve any configuration issues that might be causing the problem.

Detailed Steps for Common Fixes

Adjusting Margins and Page Layout

Microsoft Word (or similar):

• Go to File > Print > Page Setup.
• Check the margins and set them to a standard size (e.g., 1 inch).
• Ensure the paper size is set to the size you are using (e.g., A4, Letter).

PDF Viewer (e.g., Adobe Acrobat):

• Go to File > Print.
• Check the settings for Page Scaling or Fit to Page.
• Ensure the paper size matches your printer settings.

Updating Drivers and Firmware  Update the firmware on an HP printer

1. Visit the HP Support website.
2. Enter your printer model (HP DeskJet 2752) and download the latest drivers and firmware.
3. Follow the installation instructions provided on the website.

Aligning Print Heads

1. On the printer control panel, navigate to Setup > Printer Maintenance.
2. Select Align Print Heads.
3. Follow the on-screen instructions to complete the alignment process.

Refer to this document: HP DeskJet 2752 All-in-One Printer User manual

I hope this helps. 

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution.