Printer won’t print

[Soderberg1]

my HP Smart tank 70 3 zero one printer won’t print the power light is flashing and the display says 00

[VikramTheGreat]

Hi @Soderberg1,

Welcome to the HP Support Community.
 

Thank you for posting your query. I will be glad to help you.

It sounds like your HP Smart Tank 7000 printer is showing a flashing power light, and the display reads "00", which typically indicates the printer is idle or in a ready state, but the flashing light might suggest a minor error or attention needed.
 

Here are a few steps you can try:

1. Power Cycle the Printer:
   • Turn off the printer.
   • Unplug the power cord from both the printer and the wall outlet.
   • Wait for 1–2 minutes.
   • Plug it back in and turn the printer on.
      
2. Check for Paper or Ink Issues:
   • Make sure there’s no paper jam or empty paper tray.
   • Check ink levels and ensure the ink tanks are properly filled.
      
3. Inspect the Printhead:
   • If the printhead icons are blinking or showing errors, it might need cleaning or reseating.
      
4. Update Firmware:
   • Use the HP Smart App or visit the HP support site to check for firmware updates.

You can find detailed information about blinking lights and error codes for your printer: HP Smart Tank 6000, 7000, 7300, 7600 Printers - Blinking lights and error codes | HP® Support

I hope this helps.

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, as it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

VikramTheGreat

HP Support