Printing Error

[Lakelife24]

New Pro MFP 3301 sdw. We connected using USB. Was Printing & now it gives a error message Unsupported Binding

[Kuroi_Kenshi]

Hi @Lakelife24,

Welcome to the HP Support Community! 

Thanks for reaching out about your query regarding your printer!

We're thrilled to have the opportunity to assist you and provide a solution.

Try these steps:

Check Print Job Settings:

• Open the document you are trying to print and go to "File" > "Print" in your application.
• Click on "Printer Properties" or "Preferences" and check for any settings related to binding, duplex printing, or finishing options.
• Ensure that the settings are appropriate for the paper type and size you are using. For example, if you're using single-sided printing, make sure duplex options are disabled.

Update Printer Drivers:

• Outdated drivers may cause unexpected errors. Download and install the latest driver for the HP Pro MFP 3301 sdw from the HP Support website.

Check Paper Size and Type:

• Ensure that the paper size and type settings in the printer driver match the paper loaded in the printer.
• Mismatched settings can often lead to errors such as "Unsupported Binding."

Reset Printer Settings:

• You can reset the printer settings from the control panel. This can sometimes resolve configuration issues.
• Refer to the printer's user manual for steps on how to perform a factory reset.

Try a Different Application:

• Sometimes the problem can be specific to the application you are printing from. Try printing from another application to see if the issue persists.

Check for Firmware Updates:

• Make sure the printer firmware is up-to-date. Firmware updates can resolve known issues and improve printer performance.

I hope this helps.

I'm glad I could help! 😊 If this resolved your issue, please mark it as "Accepted Solution" and click "Yes" on "Was this reply helpful?" Your feedback not only keeps us going but also helps others find the solution faster! 👍✨

Take care and have an amazing day ahead! 🚀

Best regards,