Setup Cartridges Not Working Officejet Pro 6230

[BazingaMara]

My setup cartridges are not working for my Officejet Pro 6230. Is there a way to bypass the setup cartridges?  Thanks in advance. 

[sandytechy20]

@BazingaMara

Welcome to the HP support community.

Are you getting any error message while using setup cartridges?

Meanwhile:-

Remove and reinsert the ink cartridges

Remove each ink cartridge, and then reinsert them in their color-coded slots.

1. Turn on the printer.

2. Open the door to access the ink cartridges.

3. Wait until the carriage is idle and silent before you continue.

4. Push the tab on an ink cartridge, and then pull the ink cartridge from its slot.

      CAUTION: 

   Do not leave the ink cartridges outside the printer longer than 30 minutes. Doing so can result in damage to both the printer and the ink cartridges.

   

5. Reinsert the ink cartridge into its color-coded slot, and then press down on it until it snaps into place.

   

6. Repeat these steps to remove and reinsert the remaining ink cartridges.

7. Close the ink cartridge access door.

Update the printer firmware

Here are the steps:- Click here

You can refer this HP document for more assistance:- Click here

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

[BazingaMara]

This did not help me. I discovered my setup cartridges expired in December 2020. Is there anyway I can set it up without those cartridges

[TEJ1602]

@BazingaMara

We cannot bypass the use of setup ink.

Please reach out to the HP Support in your region for further course of action.

Hope this helps!

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!