display show "F"

[fayizt01]

hi,

my printer ink tank 580 display it shown "F" how can we get out from this mode?

[Kuroi_Kenshi]

Hi @fayizt01,

Welcome to the HP Support Community! 

Thanks for reaching out about your query regarding your printer!

We're thrilled to have the opportunity to assist you and provide a solution.

Try these steps:

Power Reset:

• Turn off the printer and unplug the power cord from the printer and the wall outlet.
• Wait for at least 60 seconds before plugging it back in and turning the printer on. This can sometimes resolve error states.

Check Ink Levels and Cartridges:

• Ensure that all ink tanks are filled to the appropriate levels and that no inks are running low.
• Reinsert the ink cartridges to make sure they are seated properly.

Paper Jam or Blockage:

• Open the printer to ensure there are no paper jams or any foreign objects inside.
• Remove any jammed paper carefully, using both hands to avoid tearing.

Firmware Update:

• Ensure that your printer's firmware is up-to-date by visiting the HP support website and downloading any available updates for your printer model.

Printhead Cleaning:

• Run a printhead cleaning cycle through the printer's maintenance menu to clear any blockages that might be causing the error.

Reset the Printer:

• If accessible, perform a factory reset through the printer’s control panel. Refer to the user manual for specific instructions on performing a reset.

HP Smart App Check:

• Use the HP Smart App to check for additional diagnostic options and troubleshoot the error.

I hope this helps.

I'm glad I could help! 😊 If this resolved your issue, please mark it as "Accepted Solution" and click "Yes" on "Was this reply helpful?" Your feedback not only keeps us going but also helps others find the solution faster! 👍✨

Take care and have an amazing day ahead! 🚀

Best regards,