cancel
Showing results for 
Search instead for 
Did you mean: 
Common problems for INSTANT INK, HP+ PLANS: INK AND TONER
We would like to share some of the most frequently asked questions about Instant Ink. Check out this link: HP INSTANT INK, HP+ PLANS: INK AND TONER. .
Donna431
New member
1 0 0 0
Message 1 of 2
59
Flag Post

error code OXBA00202C

HP Recommended
HP officejet 4360
Microsoft Windows 10 (64-bit)

I have an error code OXBA00202C and don't know how to fix this?

1 REPLY 1
TEJ1602
HP Support Agent
HP Support Agent
17,914 17,891 1,451 1,421
Message 2 of 2
Flag Post
HP Recommended

@Donna431, Welcome to HP Support Community!

Follow the steps below to isolate and resolve the issue-

 

Reset the printer

Reset the printer to recover from printer failures.

  1. With the printer turned on, disconnect the power cord from the printer.

  2. Unplug the power cord from the power source.

  3. Wait 60 seconds.

  4. Reconnect the power cord to a wall outlet and to the printer.

    NOTE: 

    HP recommends plugging the printer directly into a wall outlet.

If the error message persists, continue to the next step.

 

Remove the ink cartridges, and reset the printer

Remove the ink cartridges and reset the printer.

  1. Remove the ink cartridges from the printer.

  2. With the printer turned on, disconnect the power cord from the printer.

  3. Unplug the power cord from the power source.

  4. Wait at least 60 seconds.

  5. Reconnect the power cord to a wall outlet and to the printer.

    NOTE: 

    HP recommends plugging the printer directly into a wall outlet.

  6. Turn the printer on.

  7. Reinsert the ink cartridges, and then close the ink cartridge access door.

  8. If you receive a prompt to print a calibration or alignment page, do so.

If the error message persists, continue to the next step.

 

Service the printer

Service or replace your HP product if the issue persists after completing all the preceding steps.

Go to Contact HP Customer Support to schedule a product repair or replacement. If you are in Asia Pacific, you will be directed to a local service center in your area.

To confirm your warranty status, go to HP Product Warranty Check. Repair fees might apply for out-of-warranty products.

 

Hope this helps! Keep me posted. 

 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

TEJ1602
I am an HP Employee

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation