hp 5660 will not print

[chedddar]

nothing I do will get it to respond.  

[chedddar]

I am very frustrated and angry.  EVERY time I try to print I have to shut it off, disconnect the cord, plug it back in, check the internet, check the ink, check the tray, try again, and again, and again.  It totally sucks.

[VikramTheGreat]

Hi @chedddar,

Welcome to the HP Support Community.
 

Thank you for posting your query. I will be glad to help you.

I understand you have trouble printing from the HP Envy 5660 printer. May I know what error you get when you try to print?

While you try to get the error, please try the steps shared below and let me know if this helps.

Please remove the Cartridges from the Printer if possible, and try a Hard Reset. Do keep us posted to help you better.
 

** Hard reset :
1. Turn the printer on, if it is not already on.
2. Wait until the printer is idle and silent before you continue.
3. With the printer turned on, disconnect the power cord from the rear of the printer.
4. Unplug the power cord from the wall outlet.
5. Wait at least 60 seconds.
6. Plug the power cord back into the wall outlet.
NOTE: HP recommends connecting the printer power cord directly to the wall outlet.
7. Reconnect the power cord to the rear of the printer.
8. Turn on the printer if it does not automatically turn on. The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.
9. Wait until the warm-up period finishes and your printer is idle and silent before you proceed.
 

HP Smart App: Please uninstall the HP Smart app --> restart the Device, Wi-Fi router and printer --> install it back and add the printer.
 

Firmware Issue: Please update the Firmware from the link. This will help with how to update the firmware on the printer or devices.

I hope this helps.

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, as it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

VikramTheGreat

HP Support

[VikramTheGreat]

Hi @chedddar,

I hope this message finds you well. I wanted to follow up on the technical issue that we discussed earlier and confirm that it has been successfully resolved.
 

If you encounter any further issues or have any additional questions, please do not hesitate to reach out to us. We are here to assist you and provide any necessary support.
 

I will be archiving this case for now, however, you can respond to the same thread to continue the conversation.
 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!
 

Take care and have a great day ahead!
 

VikramTheGreat

HP Support