replaced Yellow cartridge, the printer gives "Printer Error" fault. Problem with printer ink system

[uthaze]

replaced Yellow cartridge, the printer gives "Printer Error" fault. Problem with printer ink system  HP printer

[Raj_05]

Hi @uthaze,

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

It sounds like there might be an issue with the ink system of your HP printer after replacing the yellow cartridge. Here are some steps you can try to troubleshoot the problem.

• Check Installation: Ensure that the yellow cartridge is properly installed. Sometimes, cartridges may not be seated correctly, leading to errors.
• Clean Contacts: Clean the contacts on both the cartridge and the printer where they make contact. Dust or ink residue can sometimes interfere with the connection.
• Restart Printer: Turn off your printer, unplug it from the power source, wait for a few minutes, then plug it back in and turn it on again. This can sometimes reset the printer's internal components and clear temporary errors.
• Update Firmware: Check if there's a firmware update available for your printer. Sometimes, HP releases updates to fix bugs and improve compatibility with new cartridges.
• Check for Obstructions: Make sure there are no obstructions in the printer that could be preventing the cartridge from being detected properly.
• Try Another Cartridge: If possible, try using a different yellow cartridge to see if the issue persists. This can help determine if the problem is with the cartridge itself or with the printer.

By going through these steps, you should hopefully be able to resolve the "Printer Error" fault related to the ink system of your HP printer.

I hope this helps.

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

Alden4

HP Support