the printer does not load the paper

[VALULLA]

the printer does not load the paper and the rollers make a mechanical noise as soon as I launch the print

[sandytechy20]

@VALULLA

Welcome to the HP support community.

Clean the paper feed rollers

1. Turn off the printer, and then disconnect the power cord.

      WARNING: 

   Disconnect the power cord before reaching inside the printer to avoid risk of injuries or electric shock.

2. Disconnect the USB cable, if it is not already disconnected.

3. Raise the input tray.

   

4. Lift and hold the input tray shield.

   NOTE: 

   Do not remove the input tray shield. The input tray shield prevents foreign debris from falling into the paper path and causing paper jams.

5. Look down through the open input tray and find the gray paper pick rollers. You might need a flashlight to illuminate the area.

   

6. Dampen a long cotton swab with bottled or distilled water, and then squeeze any excess water from the cloth.

7. Press the swab against the rollers, and then rotate them upward with your fingers. Apply a moderate amount of pressure to remove dust or dirt buildup.

8. Lower the input tray shield.

9. Allow the rollers to dry for 10 or 15 minutes.

10. Reconnect the power cord to the rear of the printer, and then turn on the printer.

11. Reconnect the USB cable to the printer if necessary.

You can refer this HP document for more assistance:- Click here

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.