• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
HP Recommended
Microsoft Windows 10 (64-bit)

Weird one, suddenly my CLX-6260 is printing blank pages when tring to print duplex, one or two single sides may be ok. Its fine when I print single sided. Its as if its loosing the image. I'm printing inraw mode, tried reinstalling driver and resetting memory of printer, different computer shows same problem. XPS driver and normal driver. Was working fine......

 

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

Fixed it 🙂

 

Turned out to be that actuator solenoid that causes problems on these (Generates error A1-4111), the pad on the face of the solenoid had become sticky and when it was doing  double sided printing it was sticking/slow to react. Also changed the pad on the metal spring loaded plate.

View solution in original post

2 REPLIES 2
HP Recommended

Duplex copying still works :-(, so probably not a physical thing. Will try and talk to it directly via USB

 

(Meant to say I am printing over a network)

 

HP Recommended

Fixed it 🙂

 

Turned out to be that actuator solenoid that causes problems on these (Generates error A1-4111), the pad on the face of the solenoid had become sticky and when it was doing  double sided printing it was sticking/slow to react. Also changed the pad on the metal spring loaded plate.

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.