• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Note: From May 1, 2024, the HP Scan and Capture app will no longer be available (retired) in the Microsoft Store and HP will not release any further app updates. Alternatively, you can download HP Smart from the Microsoft Store. For more information on how to set up your printer using the HP Smart app, go to HP printer setup (HP Smart app).
Common problems HP Solution Center not working : Adobe Flash Player Error and Unable to scan
We would like to share some of the most frequently asked questions about HP Solution Center not working : Adobe Flash Player Error and Unable to Scan.
HP Recommended

When I go to print double sided the second side is always upside down. When I go to print I make sure that it is not on the short side but it still prints upside down. Is there some place else I should be putting the proper setting in?

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

Hi @MissAngie71,

 

Welcome to the HP Support Community.

Thank you for posting your query, I will be glad to help you.

 

I see that you are facing an issue with 2 sided printing on your printer.

A) Please follow the steps below to perform a power drain.

 

1) Take out the cartridges

2) Unplug the power cord from the printer & wall.

3) Press and hold the power button down for 15 seconds and release the power button, wait for about 30 seconds.

4) Plug the power cord back into the printer and wall, ensure the printer is plugged into the wall & not into a surge protector.

5) Insert the cartridges back into the printer.

Remove the cartridges > Unplug the power cord > Wait for 30 seconds > Plug the power cord back in > Insert the cartridges

 

B) Kindly refer to the steps on this link to update the printer firmware and let me know if that resolves the issue.

 

C) If the issue still persists, uninstall the printer software by following the steps from this link and restart the devices.

 

D)  Install the printer software by clicking on the link again and let me know if that resolves the issue.

 

Note: Enable Bluetooth for an HP Smart app setup: Enable Bluetooth on your computer or mobile device so that HP Smart can detect the printer during the setup.

 

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

 

I hope this helps.

Take care and have a good day

 

Irwin6

HP Support

Irfan_06-Moderator
I am an HP Employee

View solution in original post

3 REPLIES 3
HP Recommended

Hi @MissAngie71,

 

Welcome to the HP Support Community.

Thank you for posting your query, I will be glad to help you.

 

I see that you are facing an issue with 2 sided printing on your printer.

A) Please follow the steps below to perform a power drain.

 

1) Take out the cartridges

2) Unplug the power cord from the printer & wall.

3) Press and hold the power button down for 15 seconds and release the power button, wait for about 30 seconds.

4) Plug the power cord back into the printer and wall, ensure the printer is plugged into the wall & not into a surge protector.

5) Insert the cartridges back into the printer.

Remove the cartridges > Unplug the power cord > Wait for 30 seconds > Plug the power cord back in > Insert the cartridges

 

B) Kindly refer to the steps on this link to update the printer firmware and let me know if that resolves the issue.

 

C) If the issue still persists, uninstall the printer software by following the steps from this link and restart the devices.

 

D)  Install the printer software by clicking on the link again and let me know if that resolves the issue.

 

Note: Enable Bluetooth for an HP Smart app setup: Enable Bluetooth on your computer or mobile device so that HP Smart can detect the printer during the setup.

 

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

 

I hope this helps.

Take care and have a good day

 

Irwin6

HP Support

Irfan_06-Moderator
I am an HP Employee

HP Recommended

Thanks!

HP Recommended

Hi @MissAngie71,

 

That's great! Happy to hear that the issue has been resolved. I appreciate your efforts in performing the steps to fix it and If you need further assistance feel free to reach out to us.

 

Take care and have a great day ahead!

 

Irwin6

HP Support

Irfan_06-Moderator
I am an HP Employee

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.