Envoy 7858 wont scan to email

[Johnny681]

Enter info to scan. Scan starts but keeps canceling 

[TEJ1602]

@Johnny681, Welcome to HP Support Community!

Follow the steps below-

Update the printer firmware

Download available firmware updates from the HP website

With the printer on and connected to the computer, go to HP Customer Support - Software and Driver Downloads, and then identify your printer. Look for and install any available firmware updates. Refer to the document HP Printers - Updating or Upgrading Printer Firmware

Assign manual IP to the printer

The steps on how to set a manual IP address can be found here.

For the DNS servers please use 8.8.8.8 for the Manual Preferred DNS Server and 8.8.4.4 for the Alternate DNS server. These are Google’s public DNS servers

Try these steps to re-enable the web-services -

Step 1 Remove the Web-Services -

1. From the top of the screen, touch or swipe down the tab to open the Dashboard, touch ( HP ePrint ), and then touch (Web Services Settings).

2. Touch Remove Web Services.

Reboot the devices.

Step 2 Enable the Web-Services -

1. From the top of the screen, touch or swipe down the tab to open the Dashboard, and then touch ( Setup ).

2. Touch Web Services Setup .

3. Touch Accept to accept the Web Services terms of use and enable Web Services.

4. On the screen that appears, touch OK to allow the printer to automatically check for product updates.

5. If the Printer Update Options screen is displayed, select one of the options.

6. When the printer is connected to the server, the printer prints an information page. Follow the instructions on the information page to finish the setup.

Try scanning.

Hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!