Full page zerox problem

[PabitraP1992]

Hi Everyone, 

I am trying to zerox documents using A4 full page size. Everytime it is copying the content at the corner of the page. Not using full page. 

[Max3Aj]

@PabitraP1992, Welcome to HP Support Community. 

Thank you for posting your query, I will be glad to help you. 

I understand you're facing an issue where your printer is not copying the full A4 page and instead places the content in a corner. Let's get this sorted out.

This issue typically occurs due to incorrect paper size settings or copy scaling options. Here are the steps to resolve it:

Check Paper Size Settings on the Printer:

• On your printer's control panel, go to Copy Settings or Setup.
• Look for Paper Size and ensure it is set to A4 (210 x 297 mm), not "Letter" or any other size.
• Save the settings.

Adjust Copy Resize Settings:

• In the Copy menu, find the Resize or Zoom option.
• Set it to 100% or Fit to Page to ensure the entire document is copied.

Align the Document Properly:

• Place the original document face down on the scanner glass.
• Align it with the top-left corner or as indicated by the alignment guides.

Check for Margins or Cropping Settings:

• Some printers have a "Copy Margins" or "Clip to Contents" setting.
• Make sure it's set to "Add to Contents" or "Fit to Page" to avoid cutting off parts of the document.

Update Firmware (Optional but Recommended):

• Visit HP Software and Driver Downloads and enter your printer model.
• Download and install the latest firmware if available. 

You may refer to this document - Resolve copy problems with HP printers | HP® Support

>HP LaserJet M1005 Multifunction Printer - Copies are cut off or incomplete when using an A4 size pap...
 

I hope this helps. 

Take care and have a good day. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Select "Yes" on the bottom left to say “Thanks” for helping! 

Max3Aj

HP Support