cancel
Showing results for 
Search instead for 
Did you mean: 
Common problems HP Solution Center not working : Adobe Flash Player Error and Unable to scan
We would like to share some of the most frequently asked questions about HP Solution Center not working : Adobe Flash Player Error and Unable to Scan.
Titanz
New member
1 0 0 0
Message 1 of 2
137
Flag Post

HP Color Laser MFP 179fnw how to setup scanning to email ?

HP Recommended

I want to set up email addresses on my printer ( HP Laserjet MFP 179 .

i cant find any instructions for it .

1 REPLY 1
Jay_G24
HP Support Agent
HP Support Agent
9,973 9,947 695 790
Message 2 of 2
Flag Post
HP Recommended

Hi @Titanz,

 

I'd like to help!

 

What device are you using the printer with, a Windows computer, Mac, Android or an iPhone?

 

Meanwhile, try the below suggestions -

 

Step 1- Set up Scan to Email

  1. Locate the product’s IP address. The IP address can be found on the control panel:

     

  2. Enter the product's IP address into a web browser address line. Press the Enter key on the computer keyboard.

    Figure : Example of an IP address in a browser window

    The product's Embedded Web Server (EWS) home page displays.

    Figure : Example of EWS home page

  3. Click the Scan tab.

    Figure : Example of scan screen

  4. On the left navigation pane, click Scan to Email Setup.

  5. On the Redirecting to Secure Page dialog box, click OK.

    The Redirecting to Secure Page dialog box indicates that the browser is being redirected to a secure Web page. The information on the secure Web page will be encrypted for protection and privacy purposes.

    The Web browser might display a message about the Web site's security certificate. Since the Web page is secure, click Continue to this website.

  6. Click on the Scan to Email Setup.

    Figure : Example of Outgoing Email Profiles screen

  7. On the Scan to Email Setup screen, complete the following:

    • Default From: The email address that will display as the sender of the email.

      Example: robert.smith@mycompany.com

    • Default Display Name: The name that will appear on the product control panel when the scan to email function is used.

      Example: Robert Smith

    • SMTP Server: The SMTP server address for the network.

    • SMTP Port: The SMTP port number is set to 25 by default.

      SMTP server addresses typically have this format: smtp.company.com or smtp.provider.com. SMTP server addresses may also contain a number or a geographic location.

      NOTE: 

      If you are unsure of the SMTP server address, check with your IT department, Internet service provider, or email service provider.

      NOTE: 

      The SMTP port number is set to 25 by default. You should not need to change it. However, if this setting if different from the default, your IT department or Internet service provider should be able to provide to correct setting.

    • Email Log-in Authentication: This information is required only if the email system or Internet service provider require additional security authentication. The User ID and password for email log-in authentication are encrypted. The product control panel will only display the sender's email address and the display name when the scan to email function is used.

      Figure : Example of Outgoing Profiles screen completed:

To test the configuration, use the Outgoing Email Test feature at the button of the screen, add a destination email address, and then click on Save and Test.

Figure : Example of Outgoing Email Test

NOTE: 

If the test fails, make sure to have a DNS address in the printer network configuration, this can be checked by going into the Network menu either on the EWS or the printer's front panel.

Step 2: Use the Scan to Email feature

  1. From the Home screen on the product control panel, touch Scan.

  2. Touch Email.

  3. Select the From address.

  4. To add a subject line to the email, touch the Subject button. Use the keyboard displayed on the control panel to type the subject and then touch Done.

  5. To enter the To address, touch the To button, and then:

    • Select the email address from the list of saved email addresses.

    • Touch New Email and use the keyboard displayed on the control panel to type the email address.

    Touch Done.

  6. Load the document onto the scanner glass or into the document feeder, and then touch Start Scan.

    The email is sent once all pages have been scanned.

 

You may refer to -Set up Scan to Email through the product's Embedded Web Server (EWS) and How to Scan to Email

 

Hope this helps! Keep me posted. 

 

And, Welcome to the HP Support Community. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation