HP Digital Sender 9200C login

[Daniel_Rue]

Hello.

My name is Daniel. I own an old HP Digital Sender 9200C, which I want to use to scan some old books. I do need to login to the web interface to setup the device, because I do not have a HP DSS software. Can someone please tell me the default login name and password for the 9200C? The password "1234567812345678" and "ChangeMe123!" together with user "admin" and "root" do not work. I would appreciate any hint. Thanks.

Regards,

Daniel

[Valsimot · Accepted solution]

Run a cold reset and try to access the web interface without login:

1 Turn off the digital sender.
2 Turn on the digital sender.
3 While the product is performing its memory count, hold down the #6 key. When the three status LEDs are illuminated, release the #6 key.
4 Press the #3 key four times until the display shows COLD RESET.
5 Press the #6 key once to initiate the cold reset. The product will continue its boot-up sequence.

[Daniel_Rue]

Thank you very much. It worked. Everything is visible on the web interface. Now I only have do find out how it has to be reconfigured to work with the web interface. As far as I have seen the manual only shows the procedure using DSS. I will come back, after some research and let you know how it went.