I am unable to scan using my C5180 all in one

[Nadine81]

When I attempt to scan using the HP Solution Center I get the message  that the device is disconnected.  I have replaced the USB    cable but still get the message.  I can copy. I can scan not using the HP Solution Center

[asmita6658]

Hi @Nadine81

Welcome to the HP Support Community. 

What's the operating system installed on the computer? 

While you respond to that, let's try these steps -

1) Turn on the printer, if it is not already on. 
2) Wait until the printer is idle and silent.
3) With the printer turned on, unplug the power cord from the printer & wall. 
3) Wait for 60 seconds.  
4) Plug the power cord back into the printer and wall, ensure the printer is plugged into the wall & not to a surge protector. 
5) Turn on the printer, if it does not automatically turn on.
 

If the issue still persists, try these additional steps - 

Step 1 HP Print and Scan Doctor -

Click on this link to download and run HP Print and Scan Doctor.

Step 2 Re-install the printer drivers -

1) In the search box, type and open "Uninstall a Program". 
2) Look for HP Printer software. 
3) Right-click to uninstall. 
4) In the search box, type and open “Devices and printers”. 
5) In the Devices and Printers, look for your HP printer. If you see it listed right-click on it and choose “Delete” or “Remove Device”. 
6) Open the run command with the "Windows key + R" key combo.  
7) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe” and “/s”). 
8) Click on the "Drivers" tab. 
9) Look for HP Printer driver. If you see it Click on it and click “Remove” at the bottom. 
10) Select Ok. 
11) Select Apply and Ok on the Print Server Properties windows. 
12) Close Devices and Printers Once the software and drivers are removed. 
13) Restart the computer. 
14) Download and install the software and drivers from here. Click on the downloaded file to run and follow the on-screen instructions. 

Let me know how that goes. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!