-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Scanning, Faxing, and Copying
- My Scanner Stopped Working After Windows 10 Upgrade

Create an account on the HP Community to personalize your profile and ask a question
08-22-2016 10:12 AM
Hey,
I finally upgraded my Windows 7 computer to Windows 10 and the scanner stopped working. It prints just fine, but when I go to open the scanning software, it just opens up and says “add printer”. Any help is greatly appreciated.
Bill
Solved! Go to Solution.
Accepted Solutions
08-22-2016 10:14 AM - edited 03-30-2017 09:28 AM
Well first, did you just finish upgrading? If so, you should make sure you have all Windows 10 updates – just search for "update and recovery" and click Windows update… make sure everything is up-to-date. You should also fully shut down the computer and restart it at least once before you start troubleshooting.
If you’ve done these things and you still get the screen asking you to add a printer, then the linkage between Windows 10 and HP's Full Feature software (Printer Assistant) is broken. The easiest way to get it back is to uninstall the software from Programs and Features and then install it again. Go to http://123.hp.com/us/en and search for your printer model to download the latest full version software for free.
If you need more help, check out this HP support document:
http://support.hp.com/us-en/document/c03466081
Good Luck!
Please post rather than send me a message. It's good for the community and I might not be able to get back quickly. - Thank you.
08-22-2016 10:14 AM - edited 03-30-2017 09:28 AM
Well first, did you just finish upgrading? If so, you should make sure you have all Windows 10 updates – just search for "update and recovery" and click Windows update… make sure everything is up-to-date. You should also fully shut down the computer and restart it at least once before you start troubleshooting.
If you’ve done these things and you still get the screen asking you to add a printer, then the linkage between Windows 10 and HP's Full Feature software (Printer Assistant) is broken. The easiest way to get it back is to uninstall the software from Programs and Features and then install it again. Go to http://123.hp.com/us/en and search for your printer model to download the latest full version software for free.
If you need more help, check out this HP support document:
http://support.hp.com/us-en/document/c03466081
Good Luck!
Please post rather than send me a message. It's good for the community and I might not be able to get back quickly. - Thank you.
03-23-2019 03:28 PM
Make sure you have the driver update for window 10 both 32 and 64 bit
you can download latest Full driver package...
If the driver is already installed on your system, updating (overwrite-installing) may fix various issues or just upgrade to the latest version available
HPeDriver.com