cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
Common problems HP Solution Center not working : Adobe Flash Player Error and Unable to scan
We would like to share some of the most frequently asked questions about HP Solution Center not working : Adobe Flash Player Error and Unable to Scan.
brissg
New member
4 3 0 0
Message 1 of 3
197
Flag Post

Officejet 6600 would print but not scan ;

HP Recommended
hp6600 officejet
Microsoft Windows 10 (64-bit)

after I had disconnected hp6600 printer, and it prints but scanning function does not find a scanner...cannot scan

 

2 REPLIES 2
brissg
Author
New member
4 3 0 0
Message 2 of 3
Flag Post
HP Recommended

can anybody helps me? I have used my computer and HP6600 officejet for several years with wifi and always worked find. Then I disconnected it and the scanning function does not find any scanner anymore. I uninstalled my HP6600  and reinstalled it downloaded the drivers etc.. but still it is not working. anybody has a suggestion?

Was this reply helpful? Yes No
Jay_G24
HP Support Agent
HP Support Agent
20,478 20,397 1,602 1,908
Message 3 of 3
Flag Post
HP Recommended

 Hi, @brissg,

 

I'd like to help!

 

Are you able to make copies using the printer? 

 

If yes, try the steps below-

 

 Use HP Print and Scan Doctor to check connectivity

Download a special version of HP Print and Scan Doctor specifically created to help with printer offline conditions.

  1. Download HP Print and Scan Doctor.
  2. Run HPPSdr.exe from the download location on your computer.
  3. Once HP Print and Scan Doctor opens, click Start, and then select your printer.
    • If your printer in not in the list, turn it off and on, and then click Retry.
    • If there is a connection problem, follow the instructions in HP Print and Scan Doctor.
  4. If a screen prompts you to turn on printer updates, click Yes.
  5. If a screen prompts you to make your printer the default printer, click Yes.

Set a manual IP-

 

To set a manual IP and try the steps below -

 

--->Touch on the wifi icon ((i)) on the printer, and take down the IP address 

--->Open a web browser (ex Chrome or Mozilla) and type in the printer's IP

--->then go to network ---> general ---> network protocols ---> select IPV4 only-->apply 

--->go to wireless ---> wireless 802.11---> select manual ip ---> apply

--->Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS.  

--->then go to settings on the main ews page --> power management ---> select sleep mode to max 15min

 

 Connect the printer to TCP/IP port

 

 --->Touch on the wifi icon ((i)) on the printer, and take down the IP address 

a. Click Start/Devices and Printers.  Right-click on your HP Printer.  Select Printer Properties.  Select the Ports tab at the top.

b.    Select Add Port.  Select Standard TCP/IP Port.  Select New Port.

c.    Follow the Add Port Wizard.  Under Printer Name or IP Address, .  Example:  192.168.1.15.  The IP address will be copied under Port Name.  

d.    Select Next and Finish the Wizard.

 

Hope this helps! Keep me posted. 

 

And, Welcome to the HP Support Community. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping 

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation