Scanning and copying

[KjellJansson]

HP OfficeJet Pro 8022 All-in-One

Copying and scanning does not  work. When try to do it from the printer panel an error occurs;

"Turn off the printer and reactivate again. If the problem remains the scanner has been damaged and cannot copy or scan. For further information contact HP".

What to do?

[Kumar0307]

@KjellJansson, Welcome to the HP Support Community! I’m here to help.

I understand you are not able to scan and make copies. Let us try these steps:

Reset the printer

1. With the printer turned on, disconnect the power cord from the rear of the printer.
2. Wait at least 60 seconds.
3. Reconnect the power cord to the rear of the printer.
4. Turn ON the printer, if it does not automatically turn on.
5. Wait until the printer is idle and silent before you proceed.

Note: HP recommends connecting the printer directly to a wall outlet rather than a surge protector or a power strip.

Check the scanner bar functionality

Perform a visual test of the scanner mechanism to see if it is jammed.

1. Remove any original documents or photos from the scanner glass.
2. Lift the scanner lid slightly, and then press the Copy button or icon.

If the scanner light does not move or moves halfway or is not lit, the scanner mechanism is likely jammed/broken.

In this case, please reach out to the HP Technical Support team in your region regarding the service/replacement options for your printer. 

Follow the instructions below to reach them:

1) Click on this link - https://support.hp.com/us-en/contact-hp

2) Select your product type below.

3) Enter the serial of your device. 

4) Select the country from the drop-down. 

5) Select the chat or get phone number options based on your preferences. 

6)Fill the web-form and proceed further.

If you are having trouble navigating through the above options, it's most likely because the device is out of warranty. If yes? please send me a private message with the region you are contacting us from. Check next to your profile name, you should see a little blue envelope, please click on it.  

Keep me posted for any other assistance.

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click on the YES button to reply that the response was helpful and/or to say “Thank You”.

Have a great day!