Scanning

[Abbeyjim]

HP6200 when copying or scanning all I get is coloured lines 

[Kumar0307]

@Abbeyjim, Welcome to the HP Support Community! I’m here to help.

I see that you are not able to scan or make copies from the flatbed glass. This seems like an issue with the scanner mechanism in the printer.

Kindly perform the steps mentioned in this document - Resolve scan quality problems on HP printers

Reset the printer

1. With the printer turned on, disconnect the power cord from the rear of the printer.
2. Wait at least 60 seconds.
3. Reconnect the power cord to the rear of the printer.
4. Turn ON the printer, if it does not automatically turn on.
5. Wait until the printer is idle and silent before you proceed.

Note: HP recommends connecting the printer directly to a wall outlet rather than a surge protector or a power strip.

If the issue persists,

• I've sent you a private message with further instructions to resolve this issue.
• In order to access your private messages, click the private message icon on the upper right corner of your HP community profile, next to your profile Name or simply click on this link: https://h30434.www3.hp.com/t5/notes/privatenotespage

Hope this helps! Let me know how it goes. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click on the YES button to reply that the response was helpful and/or to say “Thank You”.

Have a great day!