Showing results for 
Search instead for 
Did you mean: 
Common problems HP Solution Center not working : Adobe Flash Player Error and Unable to scan
We would like to share some of the most frequently asked questions about HP Solution Center not working : Adobe Flash Player Error and Unable to Scan.
New member
2 0 0 0
Message 1 of 2
Flag Post

can't see fax log

HP Recommended
ENVY 7645
Mac OS X 10.11 El Capitan

I can't see any fax log. When I click on the icon to show the log it just closes the window. I am also told faxes are not being received. Sent two faxes to the same number, one right after another and only one got through. Receiving fax machine is working fine.

HP Support Agent
HP Support Agent
11,684 11,655 873 981
Message 2 of 2
Flag Post
HP Recommended

Hi @,JohnL7,


Welcome to the HP Support Community.


Follow the directions below to print a fax log-


To print the fax log from the printer control panel


1. From the printer control panel display, touch Setup .

2. Touch Fax Setup , and then touch Reports .

3. Touch Print Fax Reports . 

4. Touch Last 30 Transactions Fax Logs .

5. Touch Print to begin printing. 


Try the steps below to resolve the fax issue -


Check the fax number, connection setup, and settings when faxes do not send.


For testing purposes, you can send a fax to the HP Fax Test Service at 1-888-HPFaxme (1-888-473-2963). This free service sends a return fax within 5 to 7 minutes when the fax is working properly. Your fax number must match the number you entered in the fax header to receive the return fax.

Step 1: Print a fax test report


To begin troubleshooting, print a fax test report to identify any issues with the printer, phone line connection, or fax settings. On the printer control panel, locate Run Fax Test or Fax Test Report in the Fax or Setup menus.

Review the report for any tests that failed and follow any instructions provided.


Step 2: Redial the number and adjust sending settings


Confirm the following dialing requirements and fax settings to help identify issues when faxes do not send. Fax setup and preferences settings are in the Fax or Setup menus on the printer control panel.

  • Manually dial the fax number: From the printer, dial the number as if you are making a phone call, including the area code, the access code such as '9' to connect to an outside line, and the long-distance country code. If dialing with speed dial, confirm the saved number has required pauses between numbers (adding a dash between 9 and the area code, for instance).

  • Lower the fax speed: Select the slow or standard setting.

  • Turn off Error Correction Mode: Turning off this feature can improve sending success when the phone line quality is poor, but the image quality of the received fax might be unsatisfactory. If this must be turned off to send faxes, have the phone service provider check the line quality.

  • Send the fax in black and white: If a color fax cannot be sent, the receiving fax machine might not support the feature.

  • Confirm the dialing type (tone or pulse): Most phone lines use tone dialing.

  • Enable error reporting: Turn on the Fax Error Reports feature to print a report if an error occurs when sending or receiving a fax. If the report includes a numeric error code, go to Fax Error Codes and Solutions.

Step 3: Check the connection

Check for phone line connection issues that might be causing failed sent faxes.

  • Call the fax number you are sending to from a phone: If you do not hear fax tones, the receiving fax machine might be turned off or disconnected.

  • Confirm the fax setup: There are two phone ports on the rear the printer labeled 1-Line and 2-Ext. Connect the phone line to the 1-Line port, and connect the answering machine to 2-Ext.

    Go to HP Printers - How to Fax for steps to set up your printer.

  • Check the phone line: Connect a phone to the wall jack and try to make a call. If the call fails or there is no dial tone, check if another phone or device is keeping the line open. Additionally, if you hear static, there might be interference from nearby electrical appliances (motors, fans, kitchen appliances, or televisions) and/or coax cables, or there is an issue with the line quality that requires attention from your phone service provider.

  • Use the fax cord that shipped with your printer: HP fax-capable printers ship with a two-wire phone cord. If you are using a different cord, confirm the connector does not have four wires. Shorter, higher quality cords work better than longer cords of lesser quality.

    Connector on a two-wire fax cord

  • Remove other devices from the phone line: Devices such as answering machines, modems, or other telephones might cause faxing issues.

Hope this helps! Keep me posted. 


Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation