scanner lid 2755e came of how to i reattach

[KatC1]

scanner lid 2755e came of how to i reattach

[Max3Aj]

@KatC1, Hello and welcome to the HP Support Community!

Thanks for posting your question. I'm here to help you get things back on track.

Here's how you can reattach the scanner lid on your HP DeskJet 2755e All-in-One Printer:

1. Turn off the printer and unplug it from the power source for safety.
2. Align the scanner lid hinges:
   • Look at the back of the scanner lid. You’ll see two hinge pins.
   • On the printer body, locate the hinge slots near the scanner bed.
3. Insert the hinges:
   • Carefully align the hinge pins with the slots.
   • Insert one hinge at a time, gently pressing down until it clicks into place.
4. Test the lid:
   • Once both hinges are secured, gently open and close the lid to ensure it moves smoothly and is properly attached.
5. Plug the printer back in and power it on.

I hope the information shared has been useful and resolves your concern.

Wishing you a smooth and hassle-free experience ahead!

If this solution helped, please click “Accepted Solution” so others can benefit too. Don’t forget to hit the “Yes” button if you found this helpful!

Warm regards,

Max3Aj

HP Support