cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Maverick01
New member
1 0 0 0
Message 1 of 2
65
Flag Post
HP Recommended

HP 6600 wont feed paper

Microsoft Windows 7 (32-bit)

Officejet 6600 wont feed paper and I’ve completed all troubleshooting techniques found online.  Do I need to purchase a new printer?   Really like this printer, it’s been great!  I realize the warranty has expired.  Thanks for any help.

1 REPLY 1
HP Support Agent
HP Support Agent
4,932 4,924 315 361
Message 2 of 2
28
Flag Post
HP Recommended

HP 6600 wont feed paper

@Maverick01, Welcome to the HP Support Community!

 

Have you tried making a standalone copy and check if the issue persists?

Are you using US letter size papers?

Make sure the papers are properly loaded in the tray and adjust the paper width guides. To know/verify how to load papers, refer to this document.

 

I'm afraid the issue seems to be with the paper pick rollers. Let us try these steps to resolve this issue:

 

Reset the printer

  1. With the printer turned on, disconnect the power cord from the rear of the printer.
  2. Wait at least 60 seconds.
  3. Reconnect the power cord to the rear of the printer.
  4. Turn ON the printer, if it does not automatically turn on.
  5. Wait until the printer is idle and silent before you proceed.

Note: HP recommends connecting the printer directly to a wall outlet rather than a surge protector or a power strip.

 

Update the printer firmware

Click here to know different methods of updating printer firmware.

 

Also, perform solution two and three mentioned in this document.

 

Let me know how this goes.

 

If you feel my post solved your issue, please click “Accept as Solution”, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

KUMAR0307
I am an HP Employee

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation