• ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Note: From May 1, 2024, the HP Scan and Capture app will no longer be available (retired) in the Microsoft Store and HP will not release any further app updates. Alternatively, you can download HP Smart from the Microsoft Store. For more information on how to set up your printer using the HP Smart app, go to HP printer setup (HP Smart app).
Common problems HP Solution Center not working : Adobe Flash Player Error and Unable to scan
We would like to share some of the most frequently asked questions about HP Solution Center not working : Adobe Flash Player Error and Unable to Scan.
HP Recommended
OfficeHet 8600 printer
Microsoft Windows 10 (64-bit)

I keep getting the subject message even though the ADF seems to be working fine. If I load more than one page to either copy or scan, it processes the first page without a problem, but after the second page feeds all the way through, I get the message "Reload original in the automatic document feeder (ADF) and try again".

1 REPLY 1
HP Recommended

@OffcMgrJuan

 

Welcome to the HP Support Community.

 

Let's try to reset the Printer here:

 

Turn the printer on, if it is not already on.

  1. Wait until the printer is idle and silent before you continue.
  2. With the printer turned on, disconnect the power cord from the rear of the printer.
  3. Unplug the power cord from the wall outlet.
  4. Wait at least 60 seconds.
  5. Plug the power cord back into the wall outlet.
  6. NOTE: HP recommends connecting the printer power cord directly to the wall outlet.
  7. Reconnect the power cord to the rear of the printer.
  8. Turn on the printer, if it does not automatically turn on.
  9. Wait until the printer is idle and silent before you proceed.

Also, try connecting the Printer to a different wall outlet directly.

 

Clean the rollers:

 

Turn the printer off, disconnect the power cord, and then open the ADF cover.

  1. Find any paper pick rollers and the separator pad inside the ADF. These parts have a rubber coating.

    Paper pick rollers and separator pad in the ADF

  2. Lightly dampen a clean, lint-free cloth with distilled or filtered water, squeeze any excess liquid from the cloth, and then wipe any residue off the rollers and separator pad.

  3. Leave the ADF cover open for two minutes to allow the parts to dry, and then close the cover.

  4. Reconnect the power cord to the printer, and then try making a copy.

Also, you may try a firmware update: https://support.hp.com/in-en/document/c02919168

 

Let me know if this helps.

 

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!

 

Thanks!

Have a great day!


I am an HP Employee

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.