11-01-2019 09:35 PM
I have purchased scanjet enterprise flow 7000 s3 scanner and want to use it by my won application.
My application uses Twain driver.
But the current drivers available on HP site is ISIS and Basic drivers.
I installed the basic driver and found a Twain which is not compatible with my application!!!
My application runs very fine with Kodak, Xerox, scanjet enterprise flow 7000 s2 Twain driver.
But the Basic Driver for scanjet enterprise flow 7000 s3 can't work!!!!
So, I think a advance Twain driver for scanjet enterprise flow 7000 s3 is needed.
Please help me how could I found this type of driver.
Solved! Go to Solution.
11-17-2019 11:39 AM
Download and install the HP ScanJet Flow 7000 s3 Full Feature Software and Driver, that should install a twain interface:
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution 🙂
11-22-2019 11:42 PM
My software works fine now.
But still I am facing a problem to run my software.
This problem is very unpredictable!
My software stopes responding after one/two/three or runs smoothly regardless of the machines configuration!
On the same machine the software runs hole day without any problem for one day. But in next day it may hangs for several times.
I have also use HP ScanJet Flow 7000 s2 scanner with its driver (45 ppm) and it works fine for a long time.
I think the driver of HP ScanJet Flow 7000 s3 can't handle the speed of the images (75 ppm)!!!
So, is there any provision for revised version for the driver of HP ScanJet Flow 7000 s3?