cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
1 0 0 0
Message 1 of 2
126
Flag Post

My HP office jet pro 6978 says paper is jammed? And there is no paper jam.

HP Recommended
Office jet pro
Microsoft Windows XP

The printer says paper jam and there is no paper jam. 

1 REPLY 1
Highlighted
HP Support Agent
HP Support Agent
22,544 22,437 1,231 1,334
Message 2 of 2
Flag Post
HP Recommended

@Jennyball123

 

Welcome to HP support community.

 

Make sure the carriage can move freely

  1. urn on the printer, if it is not already on.

  2. Open the cartridge access door.

    Opening the ink cartridge access door

  3. Wait until the carriage is idle and silent before you continue.

  4. With the printer turned on, disconnect the power cord from the rear of the printer.

  5. Unplug the power cord from the power source or electrical outlet.

       WARNING: 

    You must unplug the power cord to move the carriage by hand and reset the paper feed mechanism without the risk of electrical shock.

  6. Use a flashlight to check for any paper or objects that might be restricting the carriage, and then remove any paper or objects that you find.

       CAUTION: 

    If the paper tears when you remove it from the rollers, check the rollers and wheels for torn pieces of paper that might remain inside the printer. If pieces of paper remain in the printer, more paper jams can occur.

    Checking the rollers and wheels for pieces of paper

  7. Reach inside the printer through the ink cartridge access door, and then manually move the carriage.

    • If the carriage is stuck on the right side of the printer, move the carriage to the left side of the printer.

    • If the carriage is stuck on the left side of the printer, move the carriage to the right side of the printer.

    • If the carriage is stuck in the middle of the printer, move the carriage to the right side of the printer.

  8. Remove any loose paper or obstructions found.

  9. Make sure the carriage can move freely across the width of the printer. Firmly push the carriage to the left side of the printer, and then push it to the right side.

  10. Close the ink cartridge access door.

  11. Reconnect the power cord and any other cables to the rear of the printer, and then turn on the printer.

You can refer this HP document for more more assistance:- Click here

 

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

0 Kudos
Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation