• ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Note: From May 1, 2024, the HP Scan and Capture app will no longer be available (retired) in the Microsoft Store and HP will not release any further app updates. Alternatively, you can download HP Smart from the Microsoft Store. For more information on how to set up your printer using the HP Smart app, go to HP printer setup (HP Smart app).
Common problems HP Solution Center not working : Adobe Flash Player Error and Unable to scan
We would like to share some of the most frequently asked questions about HP Solution Center not working : Adobe Flash Player Error and Unable to Scan.
HP Recommended
Office jet pro
Microsoft Windows XP

The printer says paper jam and there is no paper jam. 

1 REPLY 1
HP Recommended

@Jennyball123

 

Welcome to HP support community.

 

Make sure the carriage can move freely

  1. urn on the printer, if it is not already on.

  2. Open the cartridge access door.

    Opening the ink cartridge access door

  3. Wait until the carriage is idle and silent before you continue.

  4. With the printer turned on, disconnect the power cord from the rear of the printer.

  5. Unplug the power cord from the power source or electrical outlet.

       WARNING: 

    You must unplug the power cord to move the carriage by hand and reset the paper feed mechanism without the risk of electrical shock.

  6. Use a flashlight to check for any paper or objects that might be restricting the carriage, and then remove any paper or objects that you find.

       CAUTION: 

    If the paper tears when you remove it from the rollers, check the rollers and wheels for torn pieces of paper that might remain inside the printer. If pieces of paper remain in the printer, more paper jams can occur.

    Checking the rollers and wheels for pieces of paper

  7. Reach inside the printer through the ink cartridge access door, and then manually move the carriage.

    • If the carriage is stuck on the right side of the printer, move the carriage to the left side of the printer.

    • If the carriage is stuck on the left side of the printer, move the carriage to the right side of the printer.

    • If the carriage is stuck in the middle of the printer, move the carriage to the right side of the printer.

  8. Remove any loose paper or obstructions found.

  9. Make sure the carriage can move freely across the width of the printer. Firmly push the carriage to the left side of the printer, and then push it to the right side.

  10. Close the ink cartridge access door.

  11. Reconnect the power cord and any other cables to the rear of the printer, and then turn on the printer.

You can refer this HP document for more more assistance:- Click here

 

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.