cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
2 0 0 0
Message 1 of 2
106
Flag Post

Solved!

OfficeJet Pro 9020 Scanner error

HP Recommended
OfficeJet Pro 9020
Microsoft Windows 10 (64-bit)

Hi,

Bought the printer brand new and had a scanning error the first time I tried to use it.

 

Error :  Turn the printer off, And then turn it on again.

If the problem persists, the scanner has become damaged and cannot copy or scan.

For more information. Contact HP support.

 

When I turn the printer off and on, I get the error message listed above.

If I try to scan or copy, I get the error message listed above.

The scanner bulb does not light up when I try to scan

The scanner bar does not move when I try to scan, reset the printer or open the lid.

 

After a bit of searching I found a couple post with similar errors and tried the trouble shooting steps listed there.

  • With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
  • Remove USB cable, if present.
  • Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
  • Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.
  • Turn on the printer and wait till warm-up period finishes and the printer is idle.

After I have let the printer warm up and idle there is no difference, I still get the same error message.

Any advice or help would be much appreciated, thank you.

1 REPLY 1
Highlighted
HP Support Agent
HP Support Agent
5,774 5,745 347 385
Message 2 of 2
Flag Post
HP Recommended

Hi @Tony-94,

 

As this is a hardware issue, I'd suggest you contact HP in your region regarding the service options for your computer.

 

Follow the instructions below to reach them:

 

1) Click on this link - https://support.hp.com/us-en/contact-hp

2) Select your product type below.

3) Enter the serial of your device. 

4) Select the country from the drop-down. 

5) Select the chat or get phone number options based on your preferences. 

6)Fill the web-form and proceed further.

 

If you are having trouble navigating through the above options, it's most likely because the device is out of warranty. If yes? please send me a private message with the region you are contacting us from. Check next to your profile name, you should see a little blue envelope, please click on it.  

 

Have a great day! 

 

And, Welcome to the HP Support Community. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation