Printer waits before printing/scanning about 20 seconds

[Faksje2412]

HP Officejet 6600 e all in one

H711g

CZ155A

servide id [edit]

Firm.MIM2CN1827TDR

FWpatch 0

land/ 35/9

Duplex  not

ADF installed

[Riddle_Decipher]

@Faksje2412 Greetings from the HP Community!

Here are a few things that should help:

Step 1: Reset the printer

Resetting the printer can resolve some types of slow printing issues.

1. With the printer turned on, disconnect the power cord from the printer.

2. Unplug the power cord from the power source.

3. Wait 60 seconds.

4. Reconnect the power cord to a wall outlet and to the printer.

   NOTE: 

   HP recommends plugging the printer directly into a wall outlet.

Try to print. If the issue persists, continue to the next step.

Step 2: Use a different USB cable

Using a USB cable that is too long or improperly shielded can affect print speed.

If the printer is connected with a USB cable, try using a different USB cable, and then try to print. If the issue persists, continue to the next step.

FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE & SKIP TO STEP 3 ONWARD

(By the end of this article all the issues should be resolved)

Let me know how that pans out,

If you feel I was helpful, simply click on Accept as Solution to help the community grow,

That said, I will have someone follow-up on this to ensure you've been helped,

Just in case you don't get back to us, 

have a good day, ahead.