10-02-2017 07:15 AM
I have an issue with my HP LaserJet Pro MFP M277dw and Mac OS High Sierra 10.13. It just started after the OS Update. I had this same Computer and Printer with the same settings working for about a year with no issues.
When I select 'Scan to Network Folder' the document scans, attempts to save a file (you briefly see a Scan.pdf file appear in the folder but after about 1second it disappears), and then on the Printer the following Error Message Appears:
"Cannot write to \\stacy-desktop.local\Macintosh HD\Users\Shared\Printer Shared. Destination folder is read-only, has the wrong permissions or is no longer available"
What I have tried:
- I was on the phone with Apple Support today for over an hour and they could also not explain the issue on their side. They even double checked all my folder permissions (via Remote Support), all of which seemed correct. Read&Write for everyone was enabled, including for folder contents.
- The newest drivers from 25.Sept2017 HP Easy Start 188.8.131.52 did not help either.
- I uninstalled and reinstalled the printer entirely --> no improvement or change.
- I tried Scanning to a different folder, not under Shared --> no improvement or change
Here is the error message below. I would appreciate any help. Thanks
10-02-2017 09:12 AM
I could set a network shared folder with High Sierra and the M277dw with no issues at all...
Please ensure your printer firmware is up to date:
If the same persists ensure your folder is shared correctly from your Mac with read & right permissions for your user account.
As well ensure under System Preferences > Sharing that File Sharing is enabled.
Within the options screen ensure that SMB is enabled and the user is marked for Windows File Sharing.
Please let me know of any problem,
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution 🙂
10-02-2017 01:20 PM - edited 10-02-2017 01:24 PM
Thanks for responding so quickly to my post. Unfortunately, the problem persists.
my Firmware is already up to date. I reinstalled it again from the link that you posted just to be sure.
From the HP Printer Web Interface :
Firmware Datecode: 20160921
Additionally, I have File Sharing enabled under System Preferences-> Sharing (with SMB Enabled)
Finally, as mentioned, the permissions for the folder are set to read&write for Everyone, and explicity set to read&write for myself as well. I had the Apple support person check here as well just to be sure, and also tried a different share folder under my user folder, with no change :
I'm really not sure what else to check at this point, but please let me know if you think of anything else.
10-02-2017 03:20 PM
Please try scanning with color, A4 and 300 dpi. The scanned file would appear and quickly disappear in a second. Strangely, scanning to network folder works fine for lower density or with black and white. I am very frustrated with the behavior, which only happened since upgrading to High Sierra.
10-15-2017 02:55 AM
I agree with all the posts in this thread.
The transition from Sierra to High Sierra has broken Scan To Network, for anything except low resolution/file size.
At high resolutions/colour, the file appears briefly in the shared folder on the Mac, and then disappears. The printer tries in vain, but eventually produces the reported error.
It appears there is some problem with writing large amounts of data across the network, for some reason.