• ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Note: From May 1, 2024, the HP Scan and Capture app will no longer be available (retired) in the Microsoft Store and HP will not release any further app updates. Alternatively, you can download HP Smart from the Microsoft Store. For more information on how to set up your printer using the HP Smart app, go to HP printer setup (HP Smart app).
Common problems HP Solution Center not working : Adobe Flash Player Error and Unable to scan
We would like to share some of the most frequently asked questions about HP Solution Center not working : Adobe Flash Player Error and Unable to Scan.
HP Recommended
hP oFFICEJET pRO 8600 pLUS
Microsoft Windows 10 (64-bit)

My printer states that it is Error mode and will not connect to my wireless network

1 REPLY 1
HP Recommended

@BZLMTLV, Welcome to HP Support Community!

 

I see that you're unable to connect the printer to the wireless network, let us try to isolate and resolve the issue-

 

Reset the printer-

  1. Turn the printer on, if it is not already on.
  2. Wait until the printer is idle and silent before you continue.
  3. With the printer turned on, disconnect the power cord from the rear of the printer.
  4. Unplug the power cord from the wall outlet.
  5. Wait at least 60 seconds.
  6. Plug the power cord back into the wall outlet.
  7. Reconnect the power cord to the rear of the printer.
  8. Turn on the printer, if it does not automatically turn on.
  9. Wait until the printer is idle and silent before you proceed.

Check for any errors on the printer's front panel. If there is no error try to restore network defaults and try again. Here is how you do it-

  1. From the home screen of your printer control panel, touch the Wireless icon .

  2. Touch the Setup icon .

  3. Touch Restore Network Defaults or Restore Network Settings, and then touch Yes to confirm your selection.

  4. After the default network settings are restored, touch the back arrow, touch Wireless Settings, and then touch Wireless Setup Wizard.

    The printer searches for available networks.

  5. Touch the name of your wireless network.

  6. If your wireless network does not display in the list of wireless networks, touch Enter New Network Name, and then type the name of your wireless network.

    NOTE: 

    Type the exact network name, including any uppercase and lowercase letters.

  7. Type the WEP or WPA key (network password), and then touch Done.

    If you do not know your network password, go to Find Your Wireless WEP, WPA, WPA2 Password.

    Once the printer connects to the wireless network, the blue Wireless light on the control panel turns on solid.

  8. If the printer fails to connect, print a Wireless Network Test Report, and then follow any instructions on the report to troubleshoot wireless connectivity problems. For more information, go to Using a Wireless Network Test Report.

Keep me posted.

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

TEJ1602
I am an HP Employee

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.