want to disconnect scan to computer action

[Alberta5005]

I inadvertently set my printer to scan to computer in wireless setting . now not able to scan to save or print 

says application is in use with another action 

[Jeet_singh]

@Alberta5005,

Welcome to the HP Forums 🙂 I would like to take a moment and thank you for using this forum, it is a great place to find answers. For you to have the best experience on the HP forum, you could also visit our HP Forums Guide for First Time Here? Learn How to Post and More. I see from your post you are in need of support.

I'll be glad to help you out, however, for an accurate solution, I will need more details: 

To provide you with an accurate solution, I'll need a few more details: 

Have you tried to uninstall and reinstall the printer drivers?

In the meantime, let's try these steps here: 

Perform a Hard reset on the printer and make sure that the printer is connected directly to the wall outlet and not to the surge protector.

With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.

Remove USB cable, if present.

Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord and then plug back the power cord to the printer.

Turn on the printer and wait till warm-up period finishes and the printer is idle.

Next thing, I would suggest here is uninstall the printer drivers from the root level and then reinstall the printer by following the steps below: 

• Press “Windows key” + “r” to get the “Run” window.
• Type "services.msc" to get Services – Go to “Print spooler” – Right-click and “Stop” the service.
• Now again open "Run" - Type “spool” and ok - Go to PRINTERS folder - delete everything in that folder.
• Go to services again - Start the print spooler.
• Now check for issue resolution.
• If the issue persists, also try clean installing the printer drivers. Here are the steps:
• First, unplug the USB cable from the printer if present.
• Go to Control panel – Programs and feature – Select all the HP DeskJet printer entries and uninstall them.
• Now go to Control panel – Devices and printer – Select all the printer entries and remove the device.
• Press the "windows key" + "r" to get the "Run" window open - Type "printui.exe /s" (There is a space between .exe & /) and press enter.
• Under print server properties, go to drivers - remove any entry there as well.
• Again, go to the Run window, type – “c:/programdata” – Go to Hewlett Packard folder, remove any printer related folders & files.
• Restart your computer.
• Please click here to download and install the software.
• Connect the USB cable if prompted and follow the on-screen instructions to complete the installation.

Please let me know if this resolves the issue, or if you require further assistance!

Eagerly waiting for your response!

that said, If the information I've provided was helpful, 

give us some reinforcement by clicking the solution and kudos buttons, 

that'll help us and others see that we've got the answers!

Good Luck.