cancel
Showing results for 
Search instead for 
Did you mean: 
The HP Calculator Community Message Board is moving. While we prepare for the move, we are unable to accept new postings. During the move, you can look for help from other users by visiting https://www.hpmuseum.org/ . Or if you need technical support for your calculator visit: HP Calculators. .
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
Zubinho
New member
1 0 0 0
Message 1 of 2
860
Flag Post

DL360 raid

HP Recommended

Hello,

 

Is it posiible to change raid level from raid 5 to raid 10 (1+0 ) 

 

I have server with 4 disk in raid level 5. I want to add another 4 disk and change raid level from raid 5 to raid 1+0

 

I have array A vwith logical drive `

 

I`m curious if thiw steps are ok.

 

hpacucli rescan (for rescaning new disks)

hpacucli ctrl slot=0 ld 1 add drives=allunasigned

hpacucli strl slot=0 ld 1 modify raid=1+0

 

Will it work without lose of data?

 

Thanks 

 

 

 

1 REPLY 1
Paul_Tikkanen
Level 21
Level 21
136,255 97,610 20,951 28,616
Message 2 of 2
Flag Post
HP Recommended

Hi:

 

You may also want to post your question on the HPE Community Support Forum -- DL Servers section...

 

https://community.hpe.com/t5/ProLiant-Servers-ML-DL-SL/bd-p/itrc-264#.WAYhSOTru9I

Was this reply helpful? Yes No
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation