cancel
Showing results for 
Search instead for 
Did you mean: 
kaylee-k
New member
1 0 0 0
Message 1 of 2
229
Flag Post

HP sprocket saying paper lid isn’t on

HP Recommended
hp sprocket 2-in-1 camera

Hi! My HP sprocket keeps flashing red and saying that the lid isn’t on. I’ve tried resetting the sprocket, updating the app, putting new paper in, and recharging the sprocket but nothing seems to work 😞

0 Kudos
1 REPLY 1
sandytechy20
HP Support Agent
HP Support Agent
26,730 26,603 1,464 1,535
Message 2 of 2
Flag Post
HP Recommended

@kaylee-k

 

Welcome to the HP support community.

  1. Turn off the Sprocket, and then remove the paper cover.

  2. Remove any loose photo paper from the input tray, and then make sure the photo paper is in good condition. Remove any severely bent, wrinkled, or torn photo paper from the stack.

       CAUTION: 

    Do not try to remove any jammed paper from inside the paper path. This can damage the paper path rollers.

  3. Turn on the Sprocket.

    If there is jammed photo paper, the Sprocket feeds it through the output slot.

  4. Wait until the Sprocket is idle and silent, and then remove any photo paper fed through the output slot.

  5. Reload the photo paper with the HP logos facing down. Make sure to load genuine Sprocket photo paper, or the Sprocket might not print.

  6. Replace the paper cover, and then resend the print job.

You can refer this HP document for more assistance:- Click here

 

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation