cancel
Showing results for 
Search instead for 
Did you mean: 
Ste111
New member
1 0 0 0
Message 1 of 3
272
Flag Post

Trying to set up iphone SE with sprocket 200. Says device not supported. Help!!!

HP Recommended
Sprocket 200

Says device not supported

 

Help please

0 Kudos
2 REPLIES 2
KrazyToad
HP Support Agent
HP Support Agent
22,649 22,636 1,358 1,375
Message 2 of 3
Flag Post
HP Recommended

@Ste111

 

Welcome to HP Forums. This is a great place to get support, find answers and tips.

 

I have gone through your Post and would like to help

 

Please ensure your iPhone has all the latest updates

 

Next Reset the Sprocket and try connecting again

 

1. Hold the power button for about 7 seconds total. After 3 seconds, the Status LED light will turn off to indicate the printer is shutting down; continue to hold the Power button until the LED lights start to flash.

2. Release the power button. The LEDs will continue blinking for about 6 seconds.

3. While the LEDs are blinking, press and release the power button. The device will remain off until you power on again.

4. Power on; the printer will be reset to factoring settings. After a factory reset, all settings are reset to factory defaults

 

Download the HP Sprocket App from the App Store

 

Next connect the Sprocket to your iPhone

 

1. Press and hold the Power Button for 3 seconds to turn on the printer. The Status LED Indicator Light will turn white once fully powered on.

2. Open iPhone® Settings and select Bluetooth. Turn Bluetooth on and then select the printer from the listed devices.

3. Next, launch the sprocket app.

 

Let me know how it goes

 

Thank you and have a wonderful day 😊


If the information I've provided was helpful, give us some reinforcement by clicking the "Solution Accepted" on this Post and it will also help other community members with similar issue.
 

 

KrazyToad
I Am An HP Employee

0 Kudos
KrazyToad
HP Support Agent
HP Support Agent
22,649 22,636 1,358 1,375
Message 3 of 3
Flag Post
HP Recommended

@Ste111

 

I understand your concerns and frustration

 

I have sent you a private message with the next course of action

 

Please check your private message icon on the upper right corner of your HP Forums profile.

 

Next to your profile Name, you should see a little blue envelope
 

Thank you

KrazyToad
I Am An HP Employee

0 Kudos
Tags (1)
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation