cancel
Showing results for 
Search instead for 
Did you mean: 
Jlbtexas
New member
1 0 0 0
Message 1 of 2
161
Flag Post

Unable to update and battery trouble

HP Recommended
Sprocket

I have the Sprocket printer which I’ve had for 2 years.  First it is not charging but is 100% when plugged in second  I have followed the steps to upgrade the firmware but it is not doing it.  Any suggestions other than repeating the steps I have done?  Thank you.

0 Kudos
Tags (1)
1 REPLY 1
TEJ1602
HP Support Agent
HP Support Agent
18,899 18,877 1,560 1,570
Message 2 of 2
Flag Post
HP Recommended

@Jlbtexas, Welcome to HP Support Community!

 

Reset the printer

  1. Turn on the printer.

  2. Locate the Reset button near the charging port.

    Locating the reset button

  3. Gently insert the straight pin into the reset button access point, and then press the Reset button for 3 seconds.

    The printer resets and turns off.

  4. Turn on the printer.

Try updating the firmware now.

 

If you still have issues, let me know the exact printer model for further assistance.

 

Keep me posted.

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

TEJ1602
I am an HP Employee

0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation