Resolve Windows 10 related issues for your HP computers or printers by HP Windows 10 Support Center
Whenever I turn on my computer it says automatic repair couldn't repair your computer and i tried all the options and none of them work
Hey there! @Drgnslea,
Were there any recent windows update on the PC?
Try restoring the BIOS to defaults and check if it helps.
Turn on your PC keep tapping the F10 key, you will boot into BIOS.
From the main or file menu select restore defaults.
Select F10 to save changes and exit.
Try the steps recommended below.
If you see "your PC did not start correctly", you can go into Boot Options menu and use Command Prompt to get out of automatic repair loop.
Turn on the PC keep tapping the F11 key to boot into the recovery manager.
Step 1 Click Advanced Options; Choose Troubleshoot > Advanced Options > Command Prompt;
Step 2 Enter the following lines and press Enter after each line to run it:bootrec.exe /rebuildbcd bootrec.exe /fixmbr bootrec.exe /fixboot. Then restart the PC.
If the bootrec.exe command doesn't fix the automatic repair loop, some suggest that you should run chkdsk commands as well.
Also, try performing a system reset on the PC and check if it helps.
Refer this article to know more information about performing a system reset. Click Here
Lastly, try running a system diagnostics test on the PC and check if the hardware components on the PC are functioning correctly.
Refer this article to know more information about running system diagnostics on your PC. Click Here
Let me know if this works!
I hope you have a great day! 🙂
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
A4Apollo I am an HP Employee
Didn't find what you were looking for?
Ask the community