HP stream recovery with micro SD

[Badma69]

My house stream 7 I got it second hand with a few others off a website it just goes to the blue error oxc0000000f so I decided to download the whole system install and image and would like to know how I get the tablet to boot from SD card is it as easy as inserting SD card in slot on back of tab 

[Jeet_singh]

@Badma69,

Thank you for posting your query on HP Community,

Let's try to run an extensive system test from F2 and check if the hardware components on your PC are functioning correctly.

1. Hold the power button for at least five seconds to turn off the computer.

2. Turn on the computer and immediately press Esc repeatedly, about once every second.

When the menu appears, press the F2 key.

3. On the HP PC Hardware Diagnostics (UEFI) main menu, click System Tests.

4. Click Extensive Test.

5. Click Run once, or Loop until error.

While the test is running, the time remaining and test result for each component are

shown on the screen.

6. If a component fails a test, write down the failure ID (24-digit code) so you have it

available when you contact HP Customer Support. The information is also available in

Test Logs on the main menu.

Refer this article to know more information about running system diagnostics on your PC. Click Here

Depending on the test results, If the test fails then this clearly indicates a possible hardware failure Please contact our HP support team with the failure ID for further assistance. 

If the test passes, I would recommend you may refer to the steps suggested in this support document for - HP Stream 7 and HP Stream 8 Tablet PCs - Performing an HP System Recovery

Let me know if you need any further assistance. I'll be more than happy to help you.

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!