cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
tabletwindows
New member
2 0 0 0
Message 1 of 2
264
Flag Post

I have a tablet hp stream 7.

HP Recommended
Microsoft Windows 10 (32-bit)

After i wanted to install linux on my tablet i reset it.

Now after i turn on the screen is black.

I tried to run all Diagnostic but screen is black after i turn on.

Please help me to fix the problem.

If i remove everything on tablet can to reinstall windwos or linux again?

0 Kudos
1 REPLY 1
kyle_b
Level 10
1,591 1,581 133 315
Message 2 of 2
Flag Post
HP Recommended

With the tablet powered off, plug the charger in.  Check if you see the charging pictogram in the display for 10 seconds and then it should go off for the rest of the time the charger is plugged in.  If that works, try holding the volume down button when powering up to enter the BIOS System Setup menu.

0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation