Resolve Windows 10 related issues for your HP computers or printers by HP Windows 10 Support Center
How printer all in one
Have you tried checking with a different ink cartridge?
Are you using HP genuine ink cartridges?
Please try the steps recommended below.
Print a print quality test page and check if the issue persists.
Reset the printer and check the power source
Reset the printer to clear certain error states by calibrating the scanner mechanism, and then check the power source to confirm the printer is getting enough power to operate the copier.
Press the Power button to turn on the printer, if it is not already on.
With the printer turned on, disconnect the power cord from the printer.
Disconnect the power cord from the power source, and then wait 30 seconds.
If you previously connected the power cord to a power strip or multi-plug outlet adapter, reconnect the cord directly to a wall outlet to ensure the printer is getting enough power.
Reconnect the power cord to the rear of the printer, and then turn on the printer.
If you have an HP DeskJet 3700 series printer, calibrate the scanner after resetting the printer.
Load the original document or photo, and then start a copy job.
If the issue persists, connect the printer power cord to a different wall outlet to determine if the original outlet is causing the issue.
Refer this article to know more information about copy quality issues. Click Here
Let me know if this helps!
Have a beautiful day ahead! 🙂
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
A4Apollo I am an HP Employee
Didn't find what you were looking for?
Ask the community