cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
Bagaudes_49
New member
1 0 0 0
Message 1 of 2
328
Flag Post

slate 21 and bug logo HP

HP Recommended
Slate 21
Other

My slate 21 bug on logo HP. Recovery is not possible . No sd card access...no access adb via usb ( error closed). I m search a lollipop version with de card and usb permissions.  Thank you

0 Kudos
1 REPLY 1
Riddle_Decipher
HP Support Agent
HP Support Agent
31,166 31,117 2,612 3,966
Message 2 of 2
Flag Post
HP Recommended

@Bagaudes_49 The product seems to be obsolete and hence we have limited support assistance available for the same, there are no upgrades for the OS available either, with that said, if you wish to resolve the issue with performing an HP Recovery, here's the best way to get it done:

  1. With the computer powered off, press and hold the Volume down button  and Power button  at the same time.

    Figure : Power, Brightness, and Volume buttons

    1. Volume up  and down  buttons

    2. Brightness up  and down  buttons

    3. Power button 

  2. When an HP logo appears on the screen, release the buttons.

    After a few seconds, the Android system Fast boot menu appears.

  3. Use the Volume down button  or the pg dn arrow key to move the highlighted selection to Recovery mode.

    Figure : Recovery mode

    Recovery mode in the Fast boot mode menu
    NOTE: 

    The touch screen is disabled when the computer is in recovery mode. Use the Volume up button  and Volume down button , or the pg dn and pg up keys, to navigate up or down in the recovery menu. Use the Brightness up button  or Enter key to make a selection.

  4. Press the Brightness up button  or Enter key to select.

  5. In the Android system recovery menu, use the Volume down button  or the pg dn arrow key to move the highlighted selection to wipe data/factory reset.

    Figure : Wipe data/factory reset

    Wipe data/factory reset
  6. Press the Brightness up button  or Enter key to select.

  7. The screen displays Confirm wipe of all user data? THIS CAN NOT BE UNDONE. Use the Volume down button  to move the highlight down to Yes -- delete all user data.

    Figure : Confirm wipe of all user data

    Confirm wipe of all user data
  8. Press the Brightness up button  or Enter key to confirm and begin the reset.

  9. A recovery system screen shows the reset process. Wait for the reset process to complete.

  10. When the screen says Data wipe complete, highlight Reboot system now, and then press the Brightness up button  or Enter key to select.

    Figure : Reboot system now

    Reboot system now

    Wait for the computer to reboot.

  11. Set up the computer by following the steps in the HP support document Setting Up Your HP Desktop Computer.

P.S: Welcome to HP Community 😉

 

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!

Riddle_Decipher
I am an HP Employee

0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation