Unable to connect to networks

[Rhattmode]

My pavilion x360 is not showing any available networks when i know the routers are working just fine.  Sometimes itll be fine and connect okay but then it just dosconnects and acts like theres no networks to connect to. ive had this laptop for around 3-4 years and it started doing this around a week ago. i have already done a factory reset incase there was like a corrupt file messing with things but it just went back to no connections. I need this laptop to finish out the school year for homework and stuff but i cant do anything without internet connection.

[The_Fossette]

@Rhattmode

I reviewed your post and I understand that you are facing issues with the wireless connection.

Don’t worry, I assure you I will try my best to get this sorted.

I recommend you follow the below steps and check if it helps.

Reinstall the network adapter drivers:

1. Download the drivers from here but do not run them yet.

2. Go to your start screen/menu and type Device Manager.

3. Expand Network adapters.

4. Right click on the wireless adapter and choose Uninstall.

5. Run the downloaded drivers from step 1.

6. Restart your PC and test.

Powercycle the network:

1. Shut down your notebook.

2. Unplug the power to your router.

3. Unplug the power to your modem.

4. Wait at least 45 seconds.

5. Plug in the modem, and wait for it to come back online.

6. Plug in the router, and wait for it to come back online.

7. Turn on your notebook, and test your connection.

Disable the Power Off option for the adapter:

1. Open Device Manager. (Win Key+R > type devmgmt.msc > OK)

2. Expand the Network adapters.

3. Right click on the Ethernet/Wireless Adapter and click Properties.

4. Click the Power Management tab.

5. Remove the check mark beside Allow the computer to turn off this device to save power.

6. Click OK.

7. Test.

Reset the TCP/IP settings on your PC:

1. Go to your start screen/menu and type CMD.

2. Right click on the command prompt icon and chose Run as administrator.

3. In the window that opens type "netsh int ip reset resetlog.txt" without quotes, and press enter.

4. Restart your PC and test.

It may also help to reset the winsock catalogue:

1. Go to your start screen/menu and type CMD.

2. Right click on the command prompt icon and chose Run as administrator.

3. In the window that opens type "netsh winsock reset" without quotes, and press enter.

4. Restart your PC and test.

Let me know how it goes and you have a great day!

P.S: Welcome to the HP Support Community 😊

If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!

Cheers!

Stay Home – Stay Safe