06-16-2019 11:05 PM - last edited on 06-17-2019 07:46 AM by kevin-t
Hello! this question is regarding my laptop:
Serial number: [edited]
I have upgraded to the last bios available- F.10
From new, the OS lives on a 128GB SSD, and I want to upgrade that SSD. Right now, the SSD is SATA
My question is: Will my mobo/bios support booring from a PCIe SSD? That is certainly what I would prefer...
Solved! Go to Solution.
06-19-2019 03:18 PM
@oldcrowe Welcome to HP Forums Community!
Here's the list of upgradeable parts tested and approved by HP for you (see image below)
And yes, you should be able to make use of the recovery media to install the OS on the new SSD once its replaced and it should boot from the new SSD.
You may visit page: 2 Chapter 1 - Product description using this link: Click here
(As an upgrade/custom enthusiast I personally love the idea of upgrading the device as well, However, HP recommends that you go easy on it as the device is equipped with parts that perform at its optimal performance and also, the upgradeable parts listed above are purely for your ease, though the decision to upgrade will be at your own discretion)
I hope that answers your query,
If it did, simply select "Accept as solution", to help the community grow,
And if you wish to thank us for our efforts, click on the thumbs up for kudos.
Have a great day ahead.
I am an HP Employee
06-19-2019 10:09 PM
Thanks for the reply!
I think I see from what you posted that my SSD needs to be SATA, not PCIe (as I mentioned in my original post...)
I was hoping that my bios would support PCIe... but I think I'm stuck with SATA!
06-20-2019 10:11 AM
@oldcrowe yes, I'm afraid it is SATA and I saw that on your original post, which is why I shared the image and the link 😉
Although, unless you are into major data transfer and high-performance programming/gaming, it shouldn't matter much.
That said, if you need anything else, feel free to tag me or write back to us anytime.
If you wish to thank me for my efforts, you could click on "Accept as solution" on my post as the solution should help others too.
I am an HP Employee