-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Desktops
- Desktop Boot and Lockup
- Who Me Too'd this topic
Create an account on the HP Community to personalize your profile and ask a question
09-23-2019 02:42 PM - edited 09-23-2019 03:52 PM
I inherited two old 8300 USDT's. They were working until I updated the BIOS and changed from IDE to AHCI on one of them and on the other I did not update the BIOS but I changed from IDE to AHCI.
Both now have the same exact issue. Neither will boot. The screen is blank, (no signal) no beeps, no light codes. After about 30 seconds, the fans run at full speed. This has nothing to do with the OS. It doesn't get that far.
I have tried replacing the CMOS battery, pushing the CMOS reset button and removing the SSD and memory. I cannot get it to post nor can I access the BIOS. I do get the "bad or missing RAM" beep code with the RAM removed when I attempt to boot.
I think it would be too much of a coincidence for both motherboards to crap out at the same time. It seems to be a BIOS issue.
So is there any way to recover?
Solved! Go to Solution.