HP ZCentral Remote Boost and Connect

I have a number of systems running flame and am trying to get the 2020.1 version of RGS to work properly. My current issue is that the tablet is offset to the cursor greatly in flame only. All seems to work properly outside of flame. 

My setup is senders HP Z840 running CentOS 7.6 and Autodesk flame 2020.3.1

Receivers are Ubuntu LTS 18.04 with functioning wacom drivers 

When connecting to the sender from the receiver and running flame software the on screen cursor appears to be offset from the actual pointer location making operation of the flame software impossible with the wacom stylus. I tested software installed on the flame system called inkscape and in it the tablet appears to work perfectly. This problem appears to only be present in the flame application. 

2020.0 seems to work the best so far except for requiring the audio patch script

2020.0.1 fixed the flame audio without the need for the script but the operation is not nearly as smooth when in the flame application. 

Compression artifacts using advanced video compression also cause problems with the flame UI and make it mostly unusable. in all versions 

The issue with 2020.0.1 is that in many areas of flame UI the operation is like there are mismatched frame rates. lots of tearing and chunky movement, all is better with AVC but then the UI fine detail elements loose their color and make it unusable 

My main problem is the Tablet in 2020.1 though