Having trouble signing in? Try this!
Post new question
Question
Reply
 
Honor Student
Posts: 4
Member Since: ‎04-21-2016
Message 1 of 3 (463 Views)

Sprocket pkus Print quality

Product Name: Sprocket pkus
Operating System: Android 7.0 - 7.1.2 Nougat

Hi,

 

I just bought sprocket plus printer , the print quality is poor,, I tried everything in the below link with no success. Please help 

 

https://support.hp.com/us-en/document/c05800399

 

 

Reply
0 Kudos
HP Support Agent
Posts: 12,288
Member Since: ‎01-29-2014
Message 2 of 3 (420 Views)

Re: Sprocket pkus Print quality

[ Edited ]

Hi! @abbood, Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!

 

I understand you have print quality issues on your sprocket printer.

 

Don't worry I'll try to help you out.

 

Did you make any changes to your printer?

 

Are you printing using HP ZINK® Sticky-Backed Photo Paper?

 

Please provide the image or OS you are running on your smartphone to assist you better.

 

As you mentioned you have poor print quality issues with your printer.

 

First, try uninstalling and reinstalling the sprocket app from your smartphone and check if it helps.

 

Please, the few steps recommended below.

 

Use these recommendations to help improve print quality.
Use genuine HP ZINK® Sticky-Backed Photo Paper. ZINK® makes custom photo paper for a variety of printers, such as Polaroid, LG, and HP. HP recommends using HP ZINK® Sticky-Backed Photo Paper for best results. To purchase genuine HP ZINK® Sticky-Backed Photo Paper, go to the HP Sprocket homepage. You can also purchase genuine HP ZINK® Sticky-Backed Photo Paper from other retailers.
Clean the output rollers with the blue HP ZINK® Smartsheet from the same pack of photo paper currently in the printer. Load the blue HP ZINK® Smartsheet into the input tray with the bar code facing down and the photo paper with the print side facing up, and then send a print job.
   NOTE:
Load photo paper with the Smartsheet to avoid an Out of Paper error message.
Update the printer firmware. On your mobile device, make sure it is connected to the Internet, and then open the HP Sprocket app. If there is a firmware update available, a firmware update screen displays. Follow the on-screen prompts to complete the update.
Allow the printer a few minutes to cool down between print jobs.
When the printer becomes too warm, a Cooling down... Sprocket needs to cool down before printing another job. Wait to send another photo. the message might display on the HP Sprocket app. Tap OK to clear the message.
Store the photo paper in a cool, dry place and avoid contact with water. If water spills on a photo, wipe it away as soon as possible to prevent damaging the photo.
Use clean, wrinkle-free photo paper. Avoid loading wrinkled or curled photo paper into the printer.
Make sure images have a minimum resolution of 818 x 1258 pixels per inch (ppi) for optimal print quality. Screen-captured images from your mobile device might not have sufficient resolution for optimal print quality. See your mobile device manufacturer for more information.

 

If the issue still persists try resetting the printer and update the printer firmware.

 

1.    Reset the Sprocket unit by placing a push-pin or needle into the small hole on the rear of the unit.  (Reset instructions in the support doc HERE)
2.    Plug in the Sprocket unit with the provided micro-USB cable.  Connect to either a computer USB port or USB wall charger.
3.    Allow the Sprocket unit to charge for 10 minutes.  Note:  A call back may be required in these instances.
4.    Power on the Sprocket unit by pressing/holding the power button for 3 seconds.
5.    A white LED should illuminate on the rear of the unit if power up is successful.
6.    Remind the customer to charge their Sprocket for an additional 60-90 minutes to enable a full battery charge.
 

 

If the issue still persists try updating the sprocket firmware from the sprocket app and check if it helps.

 

Open Sprocket app go to menu-->Sprocket---> Printers; A blue firmware update link will be present if an update is available.

 

Refer this article to further troubleshoot print quality issues with your sprocket printer.

 

 

If the solution provided worked for you, please mark accepted solution for this post.

 

Let me know if this works!

Have a great day! :-)

 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

                                                                                                                  

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

MrRobot
I am an HP Employee

Honor Student
Posts: 4
Member Since: ‎04-21-2016
Message 3 of 3 (378 Views)

Re: Sprocket pkus Print quality

Hi,

 

Thank you for answering.

 

I'm using original HP zink paper.

The printer is updated.

I did reset the printer.

I reinstalled the app.20180209_124626.png

I tried android and ios with the same results.

 

I feel that each color in the print has a shadow.. or hue

 

Please tell me the next step.

 

Android os attached

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation